ADS1062CML 60Mhz Digital Storage Oscilloscope 7" LCD


Always Free Shipping


The new ultra-thin design, small size and more convenient to carry;
Color TFT LCD display, waveform display is more clear and stable;
 Extensive trigger functions: edge, pulse, video, slope, alternate;
Unique digital filter and waveform recorder;
 Pass / Fail function;
 32 automatic measurements;
 2 set of reference waveforms, 20 groups of common waveforms, 20 groups of settings within the store / recall; support waveform, set, CSV and bitmap files U disk external storage and recall;

 Manual, tracking, automatic cursor measurement function;

Channel waveform and FFT waveforms at the same time split-screen display;

Analog channel waveform mesh screen brightness and brightness adjustable;

Pop-up menu display mode, the user operation more flexible, natural;

Rich interface display style: classic, modern, traditional, simple;

Multilingual interface display, the English online help system;

Standard interface: USB Host: Support U disk U disk storage and a system through software upgrades; USB Device: support for PictBridge direct printing and PC connection with the remote control; RS-232.

Bandwidth 100 MHz 40 MHz 150 MHz 60 MHz
Sampling Rate 1 GSa/s
Equivalent Sampling Rate 50 GSa/s
Memory Depth Single Channel: 2Mpts; Double Channels: 1Mpts
Rise Time < 3.5 ns < 8.8 ns < 2.3 ns < 5.8 ns
Input Impedance 1M? || 13pF 
Sec/div Range 2.5ns/div-50s/div   10ns/div-50s/div  2.5ns/div-50s/div  5ns/div-50s/div  
Scan: 100ms-50s/div
Display Color LCD, (480*234) 7" 


Input Coupling  AC, DC, GND 
Input Impedance  DC: 1M? ± 2% || 17pF ± 3pF
AC: 1.2 M? ± 2% || 17pF ± 3pF, < =100mV/div
1.0 M? ± 2% || 17pF ± 3pF, >100mV/div 
Maximum Input Voltage  ± 400V PK-PK CATI 
Ch to Ch Isolation
(Both channels in same V/div setting)  >100:1 at 20 MHz
Probe attenuator 1X, 10X 
Probe attenuator  1X, 10X, 100X, 1000X 
Horizontal System 
Real Time Sampling Rate  Single Channel 1 GSa/S; Double Channels 500 MSa/s
Equivalent Sampling Rate 50GSa/s
Measure Display Modes  main, window, window zoom, scan, x-y
Timebase Accuracy  ±100ppm measured over 10 ms interval 
Time Window  18 Divisions
Vertical System 
Vertical Sensitivity 2mV-10V/div at input BNC (1-2-5 order) 
Channel voltage offset range 2 mV-200mV: ±1.6V
206mV-10V: ± 40V in Fixed Gain Ranges & Variable Gain Ranges 
Vertical Resolution  8 bit 
Channels  2 
Analog Bandwidth (at input BNC) 60 MHz
BW Flatness  DC-10% of rated BW: ± 1dB
10%-50% of rated BW: ± 2dB
50%-100% of rated BW: ± 3dB 
Lower frequency limit (AC -3dB) ?10 Hz (at input BNC) 
Noise: Pk-Pk for 3K record  ? 0.6 Div for average of 10Pk-Pk readings in fixed gain settings.
< = 0.7 Div for average of 10 Pk-Pk readings, Variable gain settings 
SFDR including harmonics  ? 40dB 
DC Gain Accuracy  < ± 3.0%: 5mV/div to 5V/div in Fixed Gain Ranges
< ± 4.0%:typical for 2mV/div and Variable Gain Ranges 
DC Measurement Accuracy:
All Gain settings ?100mV/div  ± [3%X (|reading|+|offset|) +1% of |offset| +0.2div+2mV]
DC Measurement Accuracy:
All Gain settings>100mV/div ± [3%X (|reading|+|offset|) +1% of |offset| +0.2div+100mV] 
Math operation  +,-, *,FFT 
FFT  Window mode: Hanning, Hamming, Blackman, Rectangular 
Bandwidth limiter  20MHz ± 40% Typical (Note: BW limited below 20MHz ± 40% when using probe X1) 
Trigger System
Trigger Types  Edge, Pulse Width, Video, Slope, Alternative
Trigger Modes  Auto, Normal, Single 
Trigger Sources  Ch1-2, EXT, EXT/5, AC Line
Trigger Coupling  AC, DC, LF rej, HF rej 
Trigger Level Range  CH1, CH2: ±6divisions from center of screen
EXT: ±1.2V
EXT/5: ± 6V 
Trigger Level Accuracy (typical) applicable for the signal of rising and falling time ? 20ns  Internal: ±(0.2 div×V/div)( within ± 4 divisions from center of screen)
EXT: ±(6% of setting + 40 mV)
EXT/5: ±(6% of setting + 200 mV) 
Edge Trigger  Edge type: Rising, Falling, Rising and Falling 
Pulse Width Trigger  Trigger Modes: (>,<,=) Positive Pulse Width, (>,<,=)Negative Pulse Width Pulse Width Range: 20ns-10s 
Video Trigger  Support signal Formats: PAL/SECAM, NTSC
Trigger condition: odd field, even field, all lines, line Num 
Slope Trigger  (>,<,=) Positive slope, (>,<,=)Negative Slope
Time: 20ns-10s 
Alternative Trigger  CH1 trigger type: Edge, Pulse, Video, Slope
CH2 trigger type: Edge, Pulse, Video, Slope 
Control Panel Function
Auto Set  Auto adjusting the Vertical, Horizontal system and Trigger Position
Save/Recall  Support 2 Group referenced Waveforms, 20 Group setups, 20 Group captured Waveforms internal
Storage/Recall function and USB flash driver storage function. 
Hard Ware Frequency Counter 
Reading resolution  6 Bytes 
Accuracy  ± 0.01% 
Range  DC Couple, 10Hz to MAX Bandwidth 
Signal Types  Satisfying all Trigger signal (Except Pulse width trigger and Video Trigger) 
Acquisition System 
Sample Types  Real time, Equivalent time 
Memory Depth  Channel Mode Sampling Rate  Short memory Long Memory
Single Channel 1GS/s 40kpts No Support
Single Channel 500 MSa/s or lower  20 Kpts 2 Mpts
Double Channels 500 MSa/s or lower 20 Kpts 1 Mpts
Sample Mode  Sample, Peak Measure, Average 
Averages  4,16,32,64,128,256 
Measure System
Auto Measure
  Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot, FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Freq, Period, +Wid, -Wid, +Dut, -Dut, Bwid, Phase, FRR, FRF, FFR, FFF,LRR,LRF, LFR, LFF 
Cursor Measure  Manual mode, Track mode and Auto mode 
Display Mode Color TFT 7" diagonal Liquid Crystal Display 
Resolution  480 horizontal by 234 vertical pixels 
Display Color 64K color
Display Contrast (Typical state)  150:1 
Backlight Intensity (Typical state)  300
Wave display range  8 x 18 div 
Wave Display Mode  Point, Vector 
Point, Vector  Off, 1 sec, 2 sec, 5 sec, Infinite 
Menu Display  2 sec, 5 sec, 10 sec, 20 sec, Infinite 
Skin  Succinct 
Screen saver  1min, 2min, 5min, 10min,15min, 30min, 1hour, 2hour, 5hour, off 
Waveform Interpolation  Sin(x)/x, Linear 
Color model  Normal , Invert 
Language  English, French, German, Russian, Spanish, Simplified Chinese, Traditional Chinese, Portuguese,
Japanese, Korean, Italian, Arabic 
Interface USB Host, USB Device, RS232, Pass/Fail output 
Power Supply 
Input Voltage 100-240 VAC, CAT II, Auto selection 
Frequency Scope  45 Hz to 440 Hz
Power 50VA Max 
General Characteristics 
Dimension (L × W × H), mm  399 × 110,5 × 148,5
Weight  2.4 kg 

Add to Cart:

  • Model: SH480198
  • Shipping Weight: 470 gram