Currencies:  

Arduino Pro Mini V1.2 mega168 5V 16MHz

$22.87

Always Free Shipping

 There are two version of the Arduino Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.

Note : This item is 5V and 16 MHz version and we also have another version with 3.3V and 8 MHz .

              
                                                                                                                    Arduino Pro mini 168  - ( 5V and 16 MHz )

The Arduino Pro Mini is a microcontroller board based on the ATmega168 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, an on-board resonator, a reset button, and holes for mounting pin headers. A six pin header can be connected to an FTDI cable or Sparkfun breakout board to provide USB power and communication to the board.
 

The Arduino Pro Mini is intended for semi-permanent installation in objects or exhibitions. The board comes without pre-mounted headers, allowing the use of various types of connectors or direct soldering of wires. The pin layout is compatible with the Arduino Mini.
 

There are two version of the Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.
 

The Arduino Pro Mini was designed and manufactured by SparkFun Electronics.
It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader (select 'Arduino Duemilanove w/ 168' within the Arduino software). Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Duemilanove. It's a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors.

One Features:

* ATmega168 (16K) running at 16MHz with external resonator (0.5% tolerance)
* Supports auto-reset
* 5V regulator
* Max 150mA output
* Over current protected
* Reverse polarity protected
* DC input 5V up to 12V
* On board Power and Status LEDs

The other Features:

* ATmega168 (16K) running at 8MHz with external resonator (0.5% tolerance)
* Supports auto-reset
* 3.3V regulator
* Max 150mA output
* Over current protected
* Reverse polarity protected
* DC input 3.3V up to 12V
* On board Power and Status LEDs


There are two version of the Arduino Pro Mini. One runs at 3.3V and 8 MHz, the other at 5V and 16 MHz.

Dimensions:

* 0.7x1.3" (18x33mm)
* Less than 2 grams

Note: it doesn't come with One Arduino usb adapter


Add to Cart:

  • Model: SH460109
  • Shipping Weight: 70 gram