Currencies:  

CNC Strong Kit 4x MA860H Stepper Driver +5 Axis Breakout Board A

$332.00

Qty Discounts Off Price
1-4
$332.00
5-9
$315.40
10+
$298.80
Always Free Shipping

CNC Strong Kit 4x MA860H Stepper Driver +5 Axis Breakout Board AC 110VDC 7.2A

5 Axis Breakout Board

  • The maximum matching 5-axis stepper motor driver
  • The two-stage signal processing, signal transmission smooth, powerful anti-jamming
  • 5 input interface to define the emergency stop, limit, points in the knife, etc.
  • relay output control interface, can be accessed by the spindle motor or the air pump, water pump, etc
  • five-axis job LED display, visual display products, working condition

Electrical Parameters:

Input Power

5V DC power supply or computer USB to take power

Work axis stepper

Received the highest 5-axis independent driving

Drive

Pulse + direction + enable signal.

Weight

About 200g

CNC Stepper Motor Driver Controller 2MA860H Peak 7.2A

The 2MA860H is a high performance micro stepping drive based on pure-sinusoidal current control technology. Owing to the above technology and the self-adjustment technology (self-adjust current control parameters) according to different motors, the driven motors can run with smaller noise, lower heating, smoother movement and have better performances at higher speed than most of the drives in the markets. It is suitable for driving 2-phase hybrid stepping motors NEMA23/34/42.

The Stepper Motor Driver 2MA860H Features:
- High performance, cost-effective
- Supply voltage up to DC(24-110V) AC(50-80V)
- Output current up to 7.2A
- Self-adjustment technology
- Pure-sinusoidal current control technology
- Pulse input frequency up to 200 KHz
- TTL compatible and optically isolated input
- Automatic idle-current reduction
- 15 selectable resolutions in decimal and binary, up to 12,800 steps/rev
- Suitable for 2-phase motors
- Support PUL/DIR and CW/CCW modes
- Short-voltage, over-voltage, over-current protections

The Stepper Motor Driver 2MA860H Applications
Suitable for a wide range of stepping motors, from NEMA size 23 to 42. It can be used in various kinds of machines, such as X-Y tables, engraving machines, labeling machines, laser cutters, pick-place devices, and so on. Particularly adapt to the applications desired with low noise, low heating, high speed and high precision.
Electrical Specifications (Tj = 25oC/77oC)

Parameters 2MA860H
Min Typical Max Unit
Output current 1.5- 7.2 (6 RMS) A
Supply voltage AC50(DC24)AC60(80DC)AC80(DC110)V
Logic signal current 7 10 16 mA
Pulse input frequency 0 - 200 kHz

Package include:

- 1*5 axis Breakout Board
- 4*MA860H Stepper Driver

- 1*25 Pin Parallel Cable
- 1*USB Power Cable


Add to Cart:

  • Model: SH463319
  • Shipping Weight: 70 gram