Currencies:  

CZH-15A 15W FM Stereo Radio PLL Broadcast Transmitter GP Antenna

$207.00

Always Free Shipping

 CZH-15A 15W Low Power FM Stereo Radio PLL Broadcast Transmitter + GP Antenna


New 15W CZH-15A Low Power Stereo Broadcast FM
Radio Transmitter

Introduction

The product crust is made of high-quality aluminum, which also is the heating panel of power amplifier RD06HVF1, with blue backlight LCD to display five digits of frequency.
The motherboard is applied with chip BH1415F, which is the new-generation integrated NC FM stereo radio chip by ROHM, built-in PLL frequency, audio pre-emphasis, limiter and low pass filter circuit. Make sound more sweet.
The control board is designed with high performance MCU STC series?its performance is better than AT89C2051.
With microphone and audio input of the amplifier, adjustable input level. Transmitting power can switch between 2W and 15W.
(How to switch Press and hold the power switch button then plug in the power, when the LCD display L or H, then release the power button. By the buttons + and - to switch the transmitter power.)
Good shielding, compact structure, small size, generous appearance.
It can easy broadcast anywhere you want, home , apartment ,church ,school , club, camping , backyard , resident village.This Broadcast Package is plug and Play design, very easy to use , as you could see you could use it at instant.

Technical Specification

Power supply voltage: DC 12V
Operating current: Less than 3A
Frequency range: 88 ~ 108Mhz
Frequency step: 100kHz
Frequency stabilization method: PLL
Frequency stability: ± 10 ppm (-10 ° C to +60 ° C )
Frequency deviation: Less than ± 75kHz (100%)
Working method: Continuous
Clutter and Harmonic: ?-60dB
SNR: ?60dB
Stereo channels crosstalk: -50dB
Audio frequency response: 80 to 15000Hz
Audio distortion: < 2 %
Modulation: 15%
Input level:-15dBV (adjustable)
RF output impedance: 50 Ohm
RF output power: 2W/15W (Power can be switched)
Reference range: 8Km - 15Km (A barrier-free environment)
Unit dimensions: 147mm(L) * 88mm(W) * 38mm(H)
Notes: Must be connected to the antenna re-boot, otherwise it will burn amplifier tube.

Use process: GP antenna is installed correctly, the GP antenna BNC port connects to the host 15W launch, to ensure complete contact with good. Then connect the power, press the power button, the fans run. Then the machine to work properly.

Package includes:

1 x 15W CZH-15A FM Transmitter
1 x Power Adapter
1 x GP Antenna
1 x Audio Cable


Add to Cart:

  • Model: SH460406
  • Shipping Weight: 70 gram