FT232 EVAL Board FT232R FT232RL USB TO Serial UART Evaluation


Qty Discounts Off Price
Always Free Shipping

FT232 EVAL Board FT232R FT232RL USB TO Serial UART Evaluation Development Module

The FT232 EVAL BOARD provides a high-performance cost-effective solution for USB TO UART. It is based on the FT232RL chip and will hopefully allow to try out the full potential of the FT232 device before using it in your prototype.

FT232 Features
The FT232RL is a USB to serial UART interface with the following advanced features:

Single chip USB to asynchronous serial data transfer interface.
Data transfer rates from 300 baud to 3 Megabaud (RS422 / RS485 and at TTL levels) and 300 baud to 1 Megabaud (RS232).
Integrated 1024 bit internal EEPROM for I/O configuration and storing USB VID, PID, serial number and product description strings.
Integrated level converter on UART and CBUS for interfacing to 5V - 1.8V Logic.
High I/O pin output drive option.
Integrated power-on-reset circuit.
Fully integrated clock - no external crystal, oscillator, or resonator required.
Fully integrated AVCC supply filtering - No separate AVCC pin and no external R-C filter required.
Powered from USB bus
Voltage level is configurable via on-board jumper, VCC or 3.3V
Onboard Chips
FT232RL, USB to serial UART interface device with integrated EEPROM, level converter, and clock
MAX3232, True RS232-UART Transceivers
USB connector
RS232 connector, DB9 standard
Human to Machine Interface
CUBS and controlling port of the FT232 are connected to pin headers, convenient for development

Development Resources
User Guide CD
CD with software and drivers
Schematic Circuit Diagram
Designed by using PROTEL99
Provides IMG format or Protel SchDoc format
FTDI's royalty-free Virtual Com Port (VCP) driver
Direct (D2XX) driver
Related Software
Ultra Serial Port Monitor - 30 DAYS DEMO
Datasheets of the chips
Package Contains:
USB Cable
RS232 Cable
4-pin wire x 2
2-pin wire x 2
User Guide CD

Add to Cart:

  • Model: SH460493
  • Shipping Weight: 70 gram