Currencies:  

GB-STM32F107 STM32F107VCT6 STM32 ARM Cortex-M3 Development Board

$89.45

Qty Discounts Off Price
1-4
$89.45
5-9
$84.98
10+
$80.51
Always Free Shipping

GB-STM32F107 STM32F107VCT6 STM32 ARM Cortex-M3 Development Board + 3.2'' TFT LCD

STM32 development board, features the STM32F107VCT6 MCU + 3.2'' TFT LCD touch screen
Features
MCU: STM32F107VCT6 from STMicroelectronics, incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories(256KB FLASH, 64KB RAM) in LQFP100 package. The STM32F107VCT6 offers two 12-bit ADCs, four general-purpose 16-bit timers plus a PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, five USARTs, an USB OTG FS and two CANs. Ethernet is also available on the STM32F107VCT6.
3.2'' TFT LCD touch screen, 320*240 resolution, resistive touch function, stand-alone touch controller: TSC2046
Memories:
16 MBit Flash with SPI interface
2 KBit EEPROM with I2C interface
MicroSD card slot, SPI bus (the SD card is not included), supports FATFS
USB OTG, supports USB On The Go technology
Onboard Mini-B USB receptacle
USB cables are provided for Host/Slave mode respectively:
Host Mode: USB type A receptacle to mini-B cable
Slave Mode: USB type A plug to mini-B cable
Supports external memory card
Ethernet module, features a ethernet controller: DP83848, RMII interface, Auto-MDIX for 10/100 Mb/s
Other communication features: CAN, RS232
Boot mode selection switches
Human-Machine Interfaces: one joystick(5 directions), four buttons (Wakeup, User, Tamper, Reset)
Debugging interface: 20-pin JTAG port, compatible with ST-Link, JLink, NLink2, etc

MCU: STM32F107VCT6, LQFP100 package
Ethernet module
Ethernet controller: DP83848
RJ45 connector
16 MBit Flash with SPI interface: SST25VF016B
2 KBit EEPROM with I2C interface: 24LC02
CAN transceivers: SN65VHD230
MicroSD card slot
RS232 module
RS232 transceiver: SP3232
Two DB9 connector
USART1 enabled via jumper
USART2 supports SPI
Mini-B USB receptacle
Four buttons (Wakeup, User, Tamper, Reset)
TFT LCD module connector
Joystick (5 directions)
25M external crystal
Switches for boot mode selection
Adjustable potentiometer, for analog input
32.768KHz crystal, supports RTC
Screw-terminated connectors for CAN
20-pin JTAG debugger header, compatible with ST-Link, JLink, NLink2, etc

Development Resources
Related softwares
Examples
Schematic
Library for STM32
Development documents
Datasheets of onboard chips

Package Contains
GB-STM32F107 Development Board (including 3.2" LCD Module)
USB type A receptacle to mini-B cable
USB type A plug to mini-B cable
Serial Cable
RJ45 Crossover Cable
5V Power Adapter
User Guide CD (including development resources)


Add to Cart:

  • Model: SH460525
  • Shipping Weight: 70 gram