Leadshine 180W brushless DC servo set drive + motor


Always Free Shipping

Upgrade Your Servo Systems from BRUSHED to BRUSHLESS !!!

Included in the Package

one?Leadsehine ACS606 brushless servo drive
one?180W Leadshine BLM57180-1000 servo motor with 1000-line integrated encoder.
one?RS232 cable
one?CD with servo drive tuning software
12-month warranty

ACS606 brushless servo drive
Leadshine's fully digital AC servo drive ACS606 is developed with 32-bit DSP based on advanced control algorithm. Since its input commands are PUL/DIR signals, the users can upgrade stepping drives to the ACS606 without changing control systems. The ACS606 can offer high precision, high speed and high reliability performance, and widely used in inkjet printers, engraving machines, and etc. A built-in controller can be used for testing and tuning. PC based and handheld configuration & tuning tools can meet different tuning environments or requirements. The ACS606 can drive both DC brushless and AC servo motors.But it is more suitable for the DC brushless servo motors. Compare to the ACS806, the ACS606 has less I/O, thus has smaller size and higher cost-effective.

Input: 18 - 60VDC
Peak Current: 18A , Continuous Current: 6 A (Max)
Drive motor power range: 10 - 200 W
FOC-SVPWM technologies
PC based and handheld configuration tools
Electronic gear rate from 1/255 to 255
Self-test function with trapezoidal velocity profile
Support PUL/DIR and CW/CCW control signals
Opto-isolated, support single-ended and differential inputs
Following error lock range adjustable
Over-voltage, over-current, encoder failure protections
10 latest failures self-record function
Small size, surface-mount technology
BLM57180-1000 brushless DC servo motor

Rated power: 180W
Encoder resolution: 1,000

Continuous torque: 81 oz-in, or 0.57 N.M.
Peak torque:?243oz-in, or 1.71 N.M.
Rated speed: 3000 RPM
Peak speed: 4000 RPM
Rated current: 6.7A
Peak current: 20A
Rated voltage: 36VDC
Inductance: 2mH
Resistance: 0.9 ohm
Inertia: 0.23

Flange size: 57mm (NEMA 23)

Shaft size: 1/4 inch

Weight: 2.75 lbs, or 1.25 KG
Motor length: 4.53 inches, or 115 mm.

Matching Power supplies

To get the full power from this 200W servo set, you need a power supply of 36VDC. It is highly recommended to choose specially designe power suppliesd for motion control. Regular consumer power supplies may not be able to handle the back EMF from servo motors.

Add to Cart:

  • Model: SH470055
  • Shipping Weight: 70 gram