Brand New Wifi OBD2 / EOBD Auto Scanner
Work for i-Phone/i-Pod/i-Pod Touch/i-Pad/PC
Wifi interface is able to detect and interpret obd2 / eobd protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with this tool. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained. This tool is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII cable for easy installation. It also includes a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles which are obd2 or eobd compliant. Connecting to your iPhone / iPod touch is made by WIFI connection in adHoc mode.
With proper software installed in the host device, you may have following parameters read out from your vehicle:
Engine Coolant Temp
Calculated Engine Load
Intake Manifold Pressure
Air Intake Temp
Mass Air Flow
EVAP System Vapor Pressure
Your vehicle may not support all above parameters.
How many parameters you can get is depended on the vehicle manufacturer?s implementation.
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
Work with all obd2 or eobd cars.
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC (Data Link Connector) under the dash and the Vehicle Emission Control Information Label must state that the vehicle is OBD II compliant.
All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars from 2003/2004 in Europe are obd2 compliant.
You need any of the following hardware to make this tool work:
Important: Your PC requires wireless LAN router supporting WiFi 802.11 a/b/g for linking.
You need any of the sofware to make this tool work:
REV/Fuzzcar/Dashcommand by palmperformance
Important:softwre are not included you must buy from Apple App Store
Range: 50 ft (Line of sight)
Power Consumption: 0.75 Watts (with power switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches
Additional Sensor Support: None
1*Wifi Diagnostic Interface